Display	6 Digits 7-Segment Red LED 10.16 mm (H) x 5.54 mm (W)
Power Source	100/110 VAC or 200/220 VAC, 50/60 Hz
Power Consumption	4.3 VA
Preset Level	1 Level
Setting Range	0 – 999999 *
Input Mode	Open Collector Input L : 0 to 2 V (sink current 7mA max.) Contact Input: Relay, Microswitch, etc. (sink current 7mA max.)
Count Mode	90°Quadrature Input / Individual Add/Subtract Input (simultaneous input of add and subtract is not possible)
Maximum Count speed	Open Collector Input: 10kHz / Contact Input: 30Hz
Pulse Width	Open Collector Input:50µs / Contact Input: 16.6ms
Duty	1 : 1
Output	Relay Type 1C, 250 VAC, 2A (125VA), 220 VDC 2A (60W) cosФ = 1
Output Display	Red LED (ON when output is actuated)
Output Time	0.1 to 1second per shot (adjustable via front panel knob) or latch output
Reset Input	Contact (100 ms min.) Open Collector (sink current 10mA max.)
Reset Mode	Remote Reset, Auto-Reset, Front Panel Reset (E10-166MR)
Operation Mode	Auto-reset (display resets when preset value is reached) Overrun (counting continues even after preset value is reached)
Memory	E²PROM Data Retention: approximately 20 years Memory Frequency: 100,000 times max.
Power Source for Sensor	12 VDC, 60mA max.
Ambient Temp. : Operating	-10 – +50°C (non-freezing)
Ambient Humid. : Operating	35 – 85%RH (non-condensing)
Hi-pot Test	1500 VAC (1minute)
Insulation Resistance	100 MΩmin. (500 VDC Megger) (on Power leads and between non-charged metal parts)
Noise Immunity	Square wave noise from Noise Simulator ±2.0kV (PowerTerminals),±500V(Input Terminals)
Vibration Immunity	Malfunction: 10 to 55 Hz, double amplitude 0.5mm Destruction: 16.7 Hz, double amplitude 4mm
Shock Immunity	Malfunction: 100 m/s²(10G) Destruction: 300 m/s²(30G)
Weight	550g
Compliance	–

Models	Front Panel Reset
E10-166M	✕
E10-166MR	○

Electronic Preset CountersE10 Series

Models

Specifications

Download

CASESApplication examples of this solution.

Feel free to contact us