Line Seiki Co., Ltd. | Products | Discontinued models

Home > Products > Discontinued models > HT-7000

HT-7000

Product Type: Clamp Meter

The HT-7000 is a portable Clamp meter that measures ACV/DCV, AC/DC current, Resistance and Diode test without needing to cut cables. The meter is also equipped with test leads for easy measuring. The HT-7000 has 3.5 digits LCD display with figure size of 13mm for optimum viewing even at a distance and it has a Data Hold function to ensure user has enough time to make measurement recordings. This meter can provide measurements of upto 1000A, 600V and upto to 2kohm with a built in high overload protection. Readings are displayed in multiple resolutions with a measurement accuracy as high as ±1% of reading +2d. The HT-7000 is powered by a 9V battery and it is equipped with a hand strap for portability.

The HT-7000 is an effective tool for electrical field measurements in commercial or residential environments.

CE and RoHS compliant.

Discontinued in 2014

Download:

General Specifications
Display	13mm LCD, 3 1/2 digits display
Sensor Type	DC/AC current plus voltage, resistance, diode test, data hold function
Polarity	Automatic Switching, "-" indicates negative polarity
Current Sensor	Hall Effect Sensor
Zero Adjustment	DCA : Manual Adjustment / Other Ranges : Automatic Adjustment
Out of Range Indicator	Displays "1" or "-1"
Sampling Time	Approximately 50 hours
Power Supply	006P, MN1604(PP3) or equivalent 1 pc.
Battery Life	Approximately 0.4 seconds
Operating Conditions	0 - 50°C, less than 80%RH
Dimensions / Weight	Main Unit : 230(H) x 70(W) x 36(D)mm / Approx. 400g (Battery Included) Clamp : 34mm in diameter
Accessories	Test Leads (red and black) x 1set., 006P Battery x 16pc., Instruction Manual

Electrical Specifications
Function	Range	Resolution	Accuracy	Overload Protecetion
DC Voltage	200mV	0.1mV	±(1%+1d)	AC/DC 400V
	200V	0.1V		AC/DC 600V
	600V	1V		AC/DC 600V
AC Voltage	200V	0.1V	±(1%+2d)	AC/DC 600V
AC Voltage	600V	1V	±(1%+2d)	AC/DC 600V
Resistance	2KΩ	1Ω	±(1%+1d)	AC/DC 400V
AC/DC Current	200A	0.1A	±(1.5%+1.5d)	AC/DC 1000V
AC/DC Current	1000A	1A	±(2%+5d)	AC/DC 1000V
DiodeTest Short / non conductive, good / defective test

Test Conditions
�E Input Impedance for ACV / DCV is 10MW. ACA / ACV frequency response is from 40 to 400Hz.
�E ACA / ACV specifications are tested at sine wave 50/60Hz. Tested at 23±5°C.
�E Specifications are tested under the following environment : electromagnetetic field strength
of below 3V/m and frequency less than 300MHz.

⎕ FAQ