
G36 Series
Product Type: Self-Powered Totalizer/Ratemeter
The G36 Series is a self powered LCD Totalizer and Ratemeter. It is powered by a Lithium batter therefore external power is not required. Totalizer is 8 digits and Ratemeter is 4/5 digits in a large display with a 11.0 x 5.0mm figure size. Even in this small form, the G36 Series accepts multi input signals and count speed is upto 10kHz. Other programmable features are Prescale, Decimal Point Position and Free Write. The G36 Series is truly a powerful counter in a small form.
The G36 Series is panel mounted with a panel size of 40 x 75mm (panel cut-out size: 33 x 68mm). Reset can be done via the front reset or remote reset. The front panel is dustproof and splashproof.
Discontinued in 2012
Models | Digit | Preset | Power source | Input | Body length |
G36-101 | Totalizer | Count Up | Contact / Open collector / Voltage | 8 | No |
G36-102 | 90° Quadrature | Voltage | Yes | ||
G36-103 | Count Up / Down | Contact / Open collector | Yes | ||
G36-104 | Voltage | Yes | |||
G36-201 | Ratemeter | 1 Input | Contact / Open collector / Voltage | 4/5 *1 | Yes |
G36-301 | Totalizer / Ratemete |
1 Input | Contact / Open collector / Voltage | Totalizer:8 / Ratemete:4/5 *1 |
Yes |
Models | G36-101 | G36-102 | G36-103 | G36-104 | G36-201 | G36-301 |
Type | Totalizer | Ratemeter | Totalizer / Ratemeter |
|||
Display | 8 Digits LCD (7 digits for G36-102 / G36-103 / G36-104 when count value is negative) | 4/5 Digits LCD *1 | Totalizer : 8 Dig. LCD Ratemeter : 4/5 Digits LCD *1 |
|||
Count Mode | Totalizer | Add/Subtract 90° Quadrature |
Add/Subtract (Individual input) |
Rate Measurement |
Add / Rate Measuremen |
|
Input Type | Contact/ Open Collector/ Voltage |
Voltage | Contact/ Open Collector |
Voltage | Ratemeter | Totalizer / Ratemeter |
Input Signal | Contact : Relay, Microswitch, Open Collector Voltage : L : 0 - 0.5VDC / H : 2 - 15VD | |||||
Count Speed | Contact/Open Collector : 25Hz Voltage : 10kHz | |||||
Pulse Width | Contact/Open Collector :On/Off 20ms Voltage :On/Off 50μs | |||||
Reset | Front Reset (push button), Remote Reset | - | Front Reset (push button), Remote Reset |
|||
Battery Life | 5years (at 25°C continuous) | |||||
Power Supply | Self Powered (3V LithiumBattery) (Matsushita brand BR2/3A or Fuji Denki CR2/38L(N2) recommended) *2 | |||||
Prescale | - | 0.0001 - 100.0000 | 0.001 - 9999 | Totalizer : 0.0001 - 100.0000 Ratemeter : 0.001 - 9999 |
||
Decimal Position | - | 4 positions | 3 positions | Totalizer : 4 positions Ratemeter : 3 positions |
||
Ratemeter Specification |
- | Accuracy : ±0.2% Refresh rate : 0.7smin Zero Time: 10s |
||||
Connection | M3 Terminal Screw | |||||
Protection | Front Panel : Dust proof and Splash proof (when mounted with gasket) | |||||
Operating Temperature | -5 - +40°C (non-freezing) | |||||
Operating Humidity | 45 - 85%RH (non-condensing) | |||||
Weight | Approx. 65g |
*1 Normal programming of the unit shows 4 digits of calculated value. However,when rate is set at
x10,display shows 5 digits with fixed g0h.
*2 Replacement batteries are available for sale fromLine Seiki.
-
Metal Stamp Machine / Various Machines
Machine usage monitoring by counting the units produced is necessary to maximize investment and profitability.
Counter will start to increment every stroke made by the machine. Stroke can be set either going UP or DOWN. -
Printing Machines / Photocopiers
Counters can be used for counting the number of sheets or papers in printing machines or photocopiers.
-
Product Counting
Counters can be used for counting, sorting and packaging various products.

- Electronic Counters
- Electromagnetic Counters
- Mechanical Counters
- Length Measuring Counters
- Limit Switch
- Shut Height Counter
-
Tally Counters
- DK-5005A
- DK-5005B
- DK-5005C
- DK-5005D
- DK-5005E
- DK-5000 Mieruzzo Basic Software for Win 7/8/8.1/10
- DK-5000 Mieruzzo Easy Tag Software for Win 7/8/8.1/10
- DK-5010A
- DK-5010B
- DK-5010C
- DK-5010D
- DK-5010E
- DK-5030A
- DK-5030B
- DK-5030C
- DK-5030D
- DK-5030E
- M16-600
- M16-601
- M16-602
- M16-301
- M16-302
- M16-303
- WLAN DK-5000 Mieruzzo Basic Software for Win 7/8/8.1/10
- Wireless DK-5000 Mieruzzo Basic Software for Win 7/8/8.1/10
- M13-215
- M13-206 / M13-207
- DK-100 Series
- DK-2300
- H-102P Series
- H-102 Series
- Timers
- Measuring Instruments
- Tachometers
- Rotary Encoders
- Length Sensors
-
Discontinued models
- Discontinued Model list
- CT Series
- DK-4500WB
- DK-4500 Communication SOFTWARE for Win Xp/Vista/7
- Data Logger Software DL2005
- DSP Series
- EA-1000
- EC-2000
- EH-1000
- EL-1000
- EM-1000
- EP-15 Series
- ER-1000
- ET-1000
- EW-1000
- G10 Series
- G11 Series
- G36 Series
- G48 Series
- G60 Series
- G62 Series
- G80 Series
- G82 Series
- G85 Series
- G86 Series
- HT-7000
- LB Series
- LX-100
- MB Series
- MCH Series
- MCP-35
- MDR Series (Preset)
- MDR Series (Preset-BCD)
- MDR Series (Totalizer-BCD)
- RCP Series
- SL-24A(II)
- SP Series (Mechanical Counter)
- SP Series (Length Measuring Counter)
- SP-101/102 Series
- SRP / RLP / RLS Series
- TC-250
- TC-330WP
- TC-400
- TC-950
- TC-2200
- TH-3000
- ⎕ FAQ
